download old version JDK
Java(JDK) 1.5
http://www.oracle.com/technetwork/java/javasebusiness/downloads/java-archive-downloads-javase5-419410.html
Java(JDK) 1.6
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419409.html
Java(JDK) 1.7
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase7-521261.html
Java(JDK) 1.8
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-javase8-2177648.html
Previous Spring Tool Suite™ Downloads
토렌트와 SSD 수명, 그리고 램디스크(ramdisk/ramdrive)
-SSD는 C드라이브 사용
-HDD는 D드라이브 사용
-Ramdisk는 Z드라이브로 생성
-Ramdisk 파일은 C드라이브에 생성
-torrent 다운은 D드라이브 사용
-Radeon Ramdisk 프리버전 설치 추천
-primo ramdisk 5.6.0 + reg 설치 추천
HDD / SSD / RAMDISK 성능비교
무료 / 상용 램디스크
램디스크 활용분야
- 인터넷익스플로러 임시파일
- 에뮬게임 이미지파일
- 토렌트 임시파일
RAMDISK for LINUX
RAMDISK for raspberry pi
Windows XP - USB 4GB 이상 포맷 및 읽기 지원
Windows XP용 업데이트(KB955704)
http://www.microsoft.com/ko-kr/download/details.aspx?id=19364
WindowsXP-KB955704-x86-ENU.exe
WindowsXP-KB955704-x86-KOR.exe
xxx.exfat
토렌트 다운로드 - torrent download
utorrent 2.04 setup file download
uTorrent_2.2.1_Build_25534
uTorrent_2.2.1_Build_25534.rar
https://www.vmware.com/products/workstation/
VMWare Workstation 10 기준
가) 운영체제 ios 파일로 부터 직접 설치 가능
- CD를 통한 설치 필요 없음.
- 데몬을 통한 ios 파일 마운트 필요없음
가) ovf export 가능(3개파일 생성)
- Windows XP Professional.mf
- Windows XP Professional.ovf
- Windows_XP_Professional-disk1.vmdk
가) import 가능 : open > *.ovf 파일 선택
1. Windows 폴더 아래에 다음 파일들 생성됨.
- Windows.vmsd
- Windows.vmx
- Windows.vmxf
- Windows-disk1.vmdk
- vmware.log
- nvram
- caches(폴더)
가) ovf 파일을 통해서 virtual Box 와 교환사용 가능
C:\vmimage\Windows\caches
VM Player (무료)
6.0 / 7.0(64bit만 지원)
----------------------------------------------------------------------------------------------------------------
tuxweb VMWare 게스트 디렉토리
C:\vmware\tuxweb\>dir
caches <DIR>
nvram 8,684
tuxweb-disk1.vmdk 19,736,887,296
tuxweb.vmsd 0
tuxweb.vmx 2,575
tuxweb.vmxf 3,488
vmware-0.log 228,290
vmware-1.log 250,717
vmware-2.log 222,732
vmware.log 215,309
----------------------------------------------------------------------------------------------------------------
SSD + HDD 조합을 통한 공간활용 및 속도향상
1.SSD(C드라이브) 영역
Windows OS
VMWare 프로그램
VMWare 이미지(.vmdk 이외의 파일및 디렉토리)
C:\vmware\tuxweb\>
2.HDD(D드라이브) 영역
VMWare 이미지(.vmdk)
D:\vmdk\tuxweb\>
tuxweb-disk1.vmdk
3.vmx 수정
vmdx 경로 수정(D:\vmdk\tuxweb\)
ide0:0.fileName = "D:\vmdk\tuxweb\tuxweb-disk1.vmdk"
----------------------------------------------------------------------------------------------------------------
SSD + HDD + RAMDISK 조합을 통한 공간활용 및 속도향상
1.SSD(C드라이브) 영역
Windows OS
VMWare 프로그램
VMWare 이미지(.vmdk 이외의 파일및 디렉토리)
C:\vmware\tuxweb\>
2.HDD(D드라이브) 영역
VMWare 이미지(.vmdk)
D:\vmdk\tuxweb\>
tuxweb-disk1.vmdk
3.vmx 수정
vmdx 경로 수정(D:\vmdk\tuxweb\)
ide0:0.fileName = "D:\vmdk\tuxweb\tuxweb-disk1.vmdk"
4.RAMDISK(Z드라이브) 영역
VMWARE 프로그램 실행 전에 RAMDISK로 복사
C:\vmware\tuxweb\*.* 를 RAMDISK(Z:\vmware\tuxweb\*.*)로 복사
VMWARE 프로그램 실행 후에 SSD로 복사
caches 디렉토리도 ramdisk로 옮기고 싶다.
----------------------------------------------------------------------------------------------------------------
VMware에서 HDD용량을 줄이는건 불가능한가요?
1. Hard Disk Maximum size는 실제 크기가 아닌 가상적 설정상의 크기일 뿐입니다.
Capacity의 Current size가 실제 물리적 하드 공간에 자리 잡는 크기입니다.
Capacity의 Current size = *.vmdk 파일의 크기
2. mac os x의 vmware fusion에서는 하드 공간을 줄이는(가상 하드 크기를 줄이는 것은 아닌
쓸모 없는 빈 공간이나 쓰레기 공간을 줄이는) 기능이 있었지만, 윈도우 버전의 vmware에서는
이 기능을 제공하지 않았습니다. 다만, vmware 9 버전 부터는 이 기능을 제공하고 있습니다.
즉, vmware fusion이나 윈도우 버전의 vmware 9 버전에서는 실제 사용하고 있는 하드 공간 중
빈 공간이나 쓰레기 공간을 줄일 수 있습니다.
그림 1과 그림 2를 비교해보니 50GB의 가상 하드 공간 중 실제로 약 30GB를 사용하고 있고,
그중 실제로 17GB를 사용하고 있는 것 같습니다. 즉, 30GB - 17GB = 13GB의 자리를
잡고 있지만 쓸모 없는 공간을 제거할 수 있으며, *.vmdk 파일 크기를 약 30GB에서 약 17GB로
줄일 수 있습니다.
3. 윈도우 버전의 vmware 9 버전에서 VM > Manage > Clean up disk 메뉴를 실행하면
'Disk Cleanup' 대화상자가 나타나면서 현재 하드 공간의 크기와 줄일 수 있는 공간의 크기를
표시해 줍니다. 'Clean up now' 버튼을 클릭하면 작업이 진행되며,
하드 공간의 크기(= *.vmdk의 크기)가 줄어듭니다.
작업 종료후, VM > Setting > Hardware > Hard disk > Utilities > Defragment와
가상 머신을 실행 후 윈도우 내의 디스크조각모음을 해주시면 됩니다.
4. 첨언입니다만, HDD에서 가상머신을 실행하는 것 보다는 SSD에 복사후 실행하는 것이 더 좋으며,
RAM이 충분할 경우 램디스크를 설정한 다음 램디스크에 가상머신을 복사한 후 실행하는 것이
속도면에서 가장 좋습니다.
----------------------------------------------------------------------------------------------------------------
세팅방법
1. 정보확인
프린터 윗면 두 개 버튼을 동시에 10초 이상 눌렀다 떼어준다.
그러면 프린터 관련 자세한 내용이 프린트되어 나온다.
2. jetdirect 설정 확인 및 설정
프린트된 내용에 보면 jetdirect ip를 확인한다.
3. 프린터 jetdirect 의 IP를 변경하고 싶다면, 도스창에서 telnet 192.168.xxx.xxxx 를 타이핑하고
접속후에 IP를 변경한다.
a . IP확인
도스창에서 프린터 IP 로 ping
시작 - 실행 - cmd (입력) - 실행
> ping 192.168.xxx.xxx
b. IP변경
telnet 으로 프린터 기존 IP 로 접속한다.
도스창에서
> telenet 192.168.xxx.xxx
>? 를 입력하면 도움말이 나온다.
>/ 현재 상태 확인한다.
> ip:192.168.xxx.201 변경할 IP 를 입력한다.
> subnet-mask:255.255.255.0 서브넷이 바뀌었으면 변경한다.
> default-gw:192.168.1.1 게이트웨이도 바뀌었으면 변경한다.
> quit 변경사항을 저장하고 종료한다. 종료전에 설정내역을 보여준다.
standard tcp/ip 추가
- ip : 192.168.xxx.xxx
- port : 9100
http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=58961&lang=ko&cc=kr
드라이버 XP/2003 (32bit)
드라이버 Windows 7 (64bit)
http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=58961&swLangOid=26&swEnvOid=4060
Windows XP 에서 exFAT 파티션 사용을 위한 (KB955704)패치
http://www.microsoft.com/ko-kr/download/details.aspx?id=19364
WindowsXP-KB955704-x86-KOR.exe
HP Lasejet 2200 + JetDirect
Please type "?" for HELP, or "/" for current settings
>
To Change/Configure Parameters Enter:
Parameter-name: value <Carriage Return>
Parameter-name Type of value
ip: IP-address in dotted notation
subnet-mask: address in dotted notation (enter 0 for default)
default-gw: address in dotted notation (enter 0 for default)
syslog-svr: address in dotted notation (enter 0 for default)
idle-timeout: seconds in integers
set-cmnty-name: alpha-numeric string (32 chars max)
default-get-cmnty: 0 to disable, 1 to enable
host-name: alpha-numeric string (upper case only, 32 chars max)
dhcp-config: 0 to disable, 1 to enable
allow: <ip> [mask] (0 to clear, list to display, 10 max)
addrawport: <TCP port num> (<TCP port num> 3000-9000)
deleterawport: <TCP port num>
listrawport: (No parameter required)
addstring: <name> <contents>
contents - For non-printable characters use
\xx for two digit hex number
deletestring: <name>
liststring: (No parameter required)
addq: <name> [prepend] [append] [processing]
prepend - The prepend string name
append - The append string name
Use NULL for no string
processing - RAW, TEXT, or AUTO
deleteq: <name>
listq: (No parameter required)
defaultq: <name>
ipx/spx: 0 to disable, 1 to enable
dlc/llc: 0 to disable, 1 to enable
ethertalk: 0 to disable, 1 to enable
banner: 0 to disable, 1 to enable
Type passwd to change the password.
Type "?" for HELP, "/" for current settings or "quit" to save-and-exit.
Or type "exit" to exit without saving configuration parameter entries
>
1. ip 수정하기
> ip: 192.168.1.200
> default-gw: 192.168.1.1
> /
===JetDirect Parameters Configured===
IP Address : 192.168.1.101
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
Syslog Server : Not Specified
Idle Timeout : 90 Seconds
Set Cmnty Name : Not Specified
Host Name : Not Specified
Default Get Cmnty : Enabled
DHCP Config : Disabled
Passwd : Disabled
IPX/SPX : Enabled
DLC/LLC : Enabled
Ethertalk : Enabled
Banner page : Enabled
> quit (저장하고 나가기)
Driver PCTV 800e
http://cdn.pinnaclesys.com/SupportFiles/PCTV%20Drivers/ReadmePCTV.htm
TV viewing and PVR application for Windows XP
http://www.pctvsystems.com/tabid/62/default.aspx/Downloads/Application/TVC6Download/tabid/214/language/en-US/Default.aspx
인터넷 불펌 방지 해제 유틸리티
spell 2.8
http://www.rodream.net/
spell 설명
http://data.rodream.org/index.htm?page=spell
1. HTTP-Tunnel Client
2. Vidalia
3. SSH
HTTP-Tunnel Client(Setup)
홈페이지 : http://www.http-tunnel.com
netcat http://netcat.sourceforge.net/
corkscrew http://www.agroman.net/corkscrew/
나만의 검색 IE Add-on 추가하기
1. 네이버 검색 ie addon 추가
http://www.ieaddons.com/kr/
2. 네이버 사전 ie addon 추가
http://www.ieaddons.com/kr/createsearch.aspx
3. 네이버 사전 ie addon에서 사용 할 URL
http://endic.naver.com/search.nhn?isOnlyViewEE=N&query=TEST
There are a lot of people who experience a b0 error on their first boot up after installation. Or the bootloader immediately takes them back to the Windows installation (on dual boot).
These people probably forgot to set the MacOSX partition "Active"
A common mantra provided here to newbies for setting up for installation is:
?Make the partition Primary
?Make the partition ID=AF (signifies an HFS partition)
?Make the partition Active
There is a built-in Unix utility in MacOSX that can be used to set your partition "Active". It is called Fdisk
Setting Your Partition "Active" Using Fdisk
Words in bold below are things you must type (followed by Enter).
1. Boot your Mac OS X install dvd
2. Once the installer is running, go to the Utilities menu and open Terminal
3. Determine which disk your MacOSX partition is on
Type diskutil list
Verify which disk number holds your partition (disk0, disk1, etc.)
4. Start using Fdisk
Assuming the MacOSX disk is the first disk ("disk0"), then
type fdisk -e /dev/rdisk0 <== use "rdisk" with your disk number here !!
Ignore the error "fdisk: could not open MBR file ..."
5. Determine which partition for MacOSX needs to be set "Active"
Type p
Verify which partition is for MacOSX (1, 2, 3, etc.)
6. Set the partition "Active"
Assuming it is partition 1, then
type f 1 <== use your partition number here !!
7. Save and exit
Type write
Type y (yes you are sure)
Type exit (to quit)
8. Remove the install DVD and reboot
http://www.insanelymac.com/forum/
1) Run Half-open limit fix
2) Choose a new limit of concurrent half-open outbound connections quantity and press "Add to tcpip.sys" (for most Internet users, changing the limit to 100 will be more than sufficient)
3) Restart computer and enjoy
Running the program again may be required if Windows updates tcpip.sys, such as when a new SP is released. If program ceases to work on an updated tcpip.sys file, a new version will be available at this site.
xp SP2에서는 Blaster나 Sasser와 같은 웜바이러스의 전파를 막기 위해
TCP/IP의 동시 연결 횟수를 제한합니다.
www.LvlLord.de 사이트에 이 문제를 해결할 수 있는 패치가 있습니다.
먼저 제어판에서 이벤트 로그 보시면 TCP/IP로그 많이 있을겁니다.
클릭해서 보면 10개이상의 접속 막는다는 메시지가 있을겁니다.
즉, 10개 이상의 접속 및 접근 제한을 풀어 주는 겁니다.
사용방법: 첨부 파일의 압축을 푼다음 실행을 시키면 아래의 화면처럼 콘솔창이 뜹니다
Intelligent TCPIP.SYS patcher / EventID 4226 patch Version 2.23d
(c) 2004-05 LvlLord (www.LvlLord.de) use parameter /? for more options
This program is in development. Visit http://www.LvlLord.de for a new version
--------------------------------------------------------------------------------
- Windows mode
- Recognised Windows-directory: C:\WINDOWS
- 'Windows XP SP2 or newer' TCPIP.SYS detected ...
- Build of TCPIP.SYS : 5.1.2600.5625 (I386)
- Build of safety copy: -
(will be overwritten due to changed version)
Found limit position : 0x4FB46
Current maximum concurrent half-open connections: 10
If you continue, please press 'Abort' and 'Yes' on the popup from Windows
File Protection. Because we change system files, Windows tries to restore the
original one. So it's normal.
Do you really want to change the limit to 50?
(Y=Yes / N=No / C=Change limit) C
Please enter the number of concurrent
half-open connections (10-16777214, ESC=Auto 10/50):
If you continue, please press 'Abort' and 'Yes' on the popup from Windows
File Protection. Because we change system files, Windows tries to restore the
original one. So it's normal.
Do you really want to change the limit to 50?
(Y=Yes / N=No / C=Change limit) Y
Creating work-copy ... done ...
New limit set. Now calculating checksum ...
Checksum is: 0x5ED93
Patch complete ...
Preparing to install file ...
Installing new file ...
System TCPIP.SYS got changed ...
Waiting 15 seconds to recheck the file again ...
15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0
Now active TCPIP.SYS:
Build of file : 5.1.2600.5625 (I386)
Limit of file : 50
Installation done ...
All operations successfull.
TCPIP.SYS got changed. It's recommend to reboot NOW!
A safety copy can be found under:
C:\WINDOWS\System32\Drivers\TCPIP.SYS.ORIGINAL
Press any key to exit ...
관련파일 :
END
Windows XP 공식테마 Embedded Theme
적용방법
파일을 다운로드 받는다.
1. C:\WINDOWS\Resources\Themes 폴더에 압축을 푼다
2. 디스플레이 등록정보 창으로 들어간다.
3. 화면배색 탭에서 창 및 단추(W) 에 Embedded Style 을 선택후 확인을 누른다.
4. 바탕화면은 바탕화면 탭에서 2번 경로에 들어가셔서 변경하세요.
이사 가기 전에 가구를 배치해 보자.
https://sourceforge.net/projects/sweethome3d/
3D로 직접 꾸며 볼 수 있고 저장도 가능하다. 강력추천^^
2.
http://www.homestyler.com/designer
3D로 직접 꾸며 볼 수 있고 저장도 가능하다. 강력추천^^
3.
http://www.vrmath.co.kr
특정 아파트 구조이기는 해도 괜찮은 유틸이 아닐까 싶다.
조금 더 다듬으면 좋은 프로그램이 될 것 같은데...
4. Etc.
학생용 Autodesk 프로그램 다운받기
http://students.autodesk.com/
http://download.autodesk.com/media/adn/AdskCompTech.html