BLOG main image
분류 전체보기 (117)
Hidden (1)
five senses (0)
safe system (77)
code (35)
database (1)
Link (0)
Visitors up to today!
Today hit, Yesterday hit
daisy rss
tistory 티스토리 가입하기!
2012. 4. 17. 16:48

HP Lasejet 2200 + JetDirect

 

HP JetDirect

Please type "?" for HELP, or "/" for current settings
>
        To Change/Configure Parameters Enter:
        Parameter-name: value <Carriage Return>

        Parameter-name  Type of value
        ip:             IP-address in dotted notation
        subnet-mask:    address in dotted notation (enter 0 for default)
        default-gw:     address in dotted notation (enter 0 for default)
        syslog-svr:     address in dotted notation (enter 0 for default)
        idle-timeout:   seconds in integers
        set-cmnty-name: alpha-numeric string (32 chars max)
        default-get-cmnty:      0 to disable, 1 to enable
        host-name:      alpha-numeric string (upper case only, 32 chars max)
        dhcp-config:    0 to disable, 1 to enable
        allow:          <ip> [mask] (0 to clear, list to display, 10 max)

        addrawport:     <TCP port num> (<TCP port num> 3000-9000)
        deleterawport:  <TCP port num>
        listrawport:    (No parameter required)

        addstring:      <name> <contents>
                        contents - For non-printable characters use
                           \xx for two digit hex number
        deletestring:   <name>
        liststring:     (No parameter required)
        addq:           <name> [prepend] [append] [processing]
                        prepend     - The prepend string name
                        append      - The append string name
                        Use NULL for no string
                        processing  - RAW, TEXT, or AUTO
        deleteq:        <name>
        listq:          (No parameter required)
        defaultq:       <name>

        ipx/spx:        0 to disable, 1 to enable
        dlc/llc:        0 to disable, 1 to enable
        ethertalk:      0 to disable, 1 to enable
        banner:         0 to disable, 1 to enable

        Type passwd to change the password.

 Type "?" for HELP, "/" for current settings or "quit" to save-and-exit.
 Or type "exit" to exit without saving configuration parameter entries

 

 

1. ip 수정하기
> ip: 192.168.1.200
> default-gw: 192.168.1.1
> /

   ===JetDirect Parameters Configured===

        IP Address      : 192.168.1.101
        Subnet Mask     : 255.255.255.0
        Default Gateway : 192.168.1.1
        Syslog Server   : Not Specified
        Idle Timeout    : 90 Seconds
        Set Cmnty Name  : Not Specified
        Host Name       : Not Specified
        Default Get Cmnty : Enabled

        DHCP Config     : Disabled
        Passwd          : Disabled
        IPX/SPX         : Enabled
        DLC/LLC         : Enabled
        Ethertalk       : Enabled
        Banner page     : Enabled

> quit      (저장하고 나가기)