HP Lasejet 2200
HP Lasejet 2200 + JetDirect
Please type "?" for HELP, or "/" for current settings
>
To Change/Configure Parameters Enter:
Parameter-name: value <Carriage Return>
Parameter-name Type of value
ip: IP-address in dotted notation
subnet-mask: address in dotted notation (enter 0 for default)
default-gw: address in dotted notation (enter 0 for default)
syslog-svr: address in dotted notation (enter 0 for default)
idle-timeout: seconds in integers
set-cmnty-name: alpha-numeric string (32 chars max)
default-get-cmnty: 0 to disable, 1 to enable
host-name: alpha-numeric string (upper case only, 32 chars max)
dhcp-config: 0 to disable, 1 to enable
allow: <ip> [mask] (0 to clear, list to display, 10 max)
addrawport: <TCP port num> (<TCP port num> 3000-9000)
deleterawport: <TCP port num>
listrawport: (No parameter required)
addstring: <name> <contents>
contents - For non-printable characters use
\xx for two digit hex number
deletestring: <name>
liststring: (No parameter required)
addq: <name> [prepend] [append] [processing]
prepend - The prepend string name
append - The append string name
Use NULL for no string
processing - RAW, TEXT, or AUTO
deleteq: <name>
listq: (No parameter required)
defaultq: <name>
ipx/spx: 0 to disable, 1 to enable
dlc/llc: 0 to disable, 1 to enable
ethertalk: 0 to disable, 1 to enable
banner: 0 to disable, 1 to enable
Type passwd to change the password.
Type "?" for HELP, "/" for current settings or "quit" to save-and-exit.
Or type "exit" to exit without saving configuration parameter entries
>
1. ip 수정하기
> ip: 192.168.1.200
> default-gw: 192.168.1.1
> /
===JetDirect Parameters Configured===
IP Address : 192.168.1.101
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
Syslog Server : Not Specified
Idle Timeout : 90 Seconds
Set Cmnty Name : Not Specified
Host Name : Not Specified
Default Get Cmnty : Enabled
DHCP Config : Disabled
Passwd : Disabled
IPX/SPX : Enabled
DLC/LLC : Enabled
Ethertalk : Enabled
Banner page : Enabled
> quit (저장하고 나가기)